| Welcome to CCM MaD. We hope you enjoy your visit. If it's your first time here please make your first post in either the 'Welcome' or 'Chat' section so we can verify your account quicker, untill verified your posts will need to be manually approved before they show, please be patient. Join our community! If you're already a member please log in to access all of our features: |
- Pages:
- 1
- 2
| Carbon trick bits | |
|---|---|
| Tweet Topic Started: Jul 2 2012, 05:15 PM (1,512 Views) | |
| hursty46 | Jul 2 2012, 05:15 PM Post #1 |
|
The Hulk
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
I have a carbon sprocket cover do any of you guys know were I can get a carbon fender from??cheers |
![]() Like my CCM I'm old, overweight and badly maintained but I can still surprise you by how fast I can move!! | |
![]() |
|
| delstar16 | Jul 2 2012, 07:11 PM Post #2 |
|
Marquess
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
no help i know but i have a carbon rear end on mine but no idea where it came from ! |
![]() |
|
| hursty46 | Jul 2 2012, 07:15 PM Post #3 |
|
The Hulk
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
Cheers Delstar at least I know there's carbon bits out there to buy ill carry on searching lol |
![]() Like my CCM I'm old, overweight and badly maintained but I can still surprise you by how fast I can move!! | |
![]() |
|
| Pa644 | Jul 2 2012, 07:20 PM Post #4 |
|
Marquess
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
http://www.pro-carbon.com/scripts/zbozi.php?KID=54 |
| Aged 644 | |
![]() |
|
| jonny h | Jul 2 2012, 07:27 PM Post #5 |
|
this is how i roll!
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
as above , http://www.pro-carbonracing.co.uk does all the bits for our bike |
![]() ,C26 604e, ![]() | |
![]() |
|
| bighit | Jul 2 2012, 07:32 PM Post #6 |
|
outta here
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
my nephew is doing carbon wrapping , might be worth a try . he does some of the cars on his dads car lot .![]() ![]() ![]() could get a price if your wanting him to do it , some one on the old site did a front mudguard if i remember right |
![]() |
|
| hursty46 | Jul 2 2012, 07:52 PM Post #7 |
|
The Hulk
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
Ya please for front fender hugger please |
![]() Like my CCM I'm old, overweight and badly maintained but I can still surprise you by how fast I can move!! | |
![]() |
|
| bighit | Jul 2 2012, 08:11 PM Post #8 |
|
outta here
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
will send him pics for a rough price he is saying £40 for both the hugger and the mudguard . is the mudguard the standard one or the acerbris one with vents? |
![]() |
|
| jonny h | Jul 3 2012, 12:15 AM Post #9 |
|
this is how i roll!
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
it was ben from weymouth who did his mud guard, the acerbis is a tricky little bugger. |
![]() ,C26 604e, ![]() | |
![]() |
|
| hursty46 | Jul 3 2012, 09:03 AM Post #10 |
|
The Hulk
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
Just bought some wrap of the bay I'll give it a go my self looks quite easy to do lol cheers any way |
![]() Like my CCM I'm old, overweight and badly maintained but I can still surprise you by how fast I can move!! | |
![]() |
|
| bighit | Jul 3 2012, 06:03 PM Post #11 |
|
outta here
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
thats cool. going to get my nephew to do my side panels . dont fancy it any where else on the bike |
![]() |
|
| hursty46 | Jul 3 2012, 07:00 PM Post #12 |
|
The Hulk
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
Nice 1 upload pics when it's done can't do mine as its full of Rossi stickers lol |
![]() Like my CCM I'm old, overweight and badly maintained but I can still surprise you by how fast I can move!! | |
![]() |
|
| bighit | Jul 3 2012, 07:13 PM Post #13 |
|
outta here
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
wont be a for a while . need to get the rest of the bike done first lol |
![]() |
|
| Tricky | Jul 3 2012, 09:24 PM Post #14 |
![]()
Earl
![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
I too was looking at putting some bling on my machine (before it decided to turn into a vibrator). I found this company - http://www.carbonmods.co.uk/departments/ca...ibre-sheet.aspx They sell A4 sheets of sticky back carbon fibre for 12 quid which is certainly not as messy as using the proper stuff with the resin etc. I worked out that an A4 sheet would just about cover the fuse box cover if done a certain way which is far cheaper than buying a proper carbon fibre one from pro-carbon and it's not as if you'd replace it to save weight. The thing is i wanted to do the hugger as well so my plan was to buy the proper stuff for 40 quid which gets you a full metre as a kit with all the other stuff you need. Not bad considering the cover and the hugger in proper carbon will set you back around 140 quid plus postage. |
![]() |
|
| jonny h | Jul 3 2012, 11:50 PM Post #15 |
|
this is how i roll!
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
tricky , im guessing you watched the videos of them wrapping a part in the real carbon fiber? .. to say they make it look easy and vastly underestimate the time needed to wrap a part is an understatement! wrapping in real CF sheets and getting a proper finish is 10x harder and more time consuming than sorting normal body work out for a respray job in a show winning black. words from my friend a pro car sprayer. as for the CF look wrap , go for the stuff hexis makes rather than 3M di noc. di noc has stood still while hexis have improved their wrap each year. ps. wrapping the acerbis front mud guard is a 2 person job! |
![]() ,C26 604e, ![]() | |
![]() |
|
| jonny h | Jul 3 2012, 11:56 PM Post #16 |
|
this is how i roll!
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
pps. another route is the one ccm took with hydro dipping. http://www.wickedcoatings.co.uk/ |
![]() ,C26 604e, ![]() | |
![]() |
|
| bighit | Jul 4 2012, 05:15 PM Post #17 |
|
outta here
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
would not tell hydrographics its for a ccm lol. ccm stiffed them i think when they went bust after hydrographics dipped a lot of parts for them. was told hydrographics was selling ones they got left with |
![]() |
|
| jonny h | Jul 4 2012, 07:56 PM Post #18 |
|
this is how i roll!
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
i dont know where their based , but that wicked coatings is down portsmouth area |
![]() ,C26 604e, ![]() | |
![]() |
|
| bighit | Jul 5 2012, 06:10 PM Post #19 |
|
outta here
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
hydrographics do rifles and shotguns also . they will dip anything that fits in the tank :o |
![]() |
|
| murph | Jul 5 2012, 06:53 PM Post #20 |
|
Viscount
![]() ![]() ![]() ![]() ![]() ![]()
|
Jonny wicked designs is 5 mins up the road from me, going to have a look on sat morning will let you know what it's like and see what sort of prices |
![]() |
|
| Go to Next Page | |
| « Previous Topic · Chat · Next Topic » |
- Pages:
- 1
- 2





![]](http://z2.ifrm.com/static/1/pip_r.png)










6:56 PM Jul 11