Welcome Guest [Log In] [Register]
Welcome to CCM MaD. We hope you enjoy your visit.

If it's your first time here please make your first post in either the 'Welcome' or 'Chat' section so we can verify your account quicker, untill verified your posts will need to be manually approved before they show, please be patient.


Join our community!


If you're already a member please log in to access all of our features:

Username:   Password:
Add Reply
intake manifolds; carb to engine
Topic Started: Jun 28 2012, 08:47 PM (382 Views)
jonny h
Member Avatar
this is how i roll!
[ *  *  *  *  *  *  *  *  *  * ]
well that was easy .. NOT! stripped the whole back end off as the bolts holding the mani's on were a little on the tight side.

after a good thumping with hammer and bar they undid (thankgod), shed loads of thread lock was on them...

anyway those bolts were now knackerd, but because of my forward planning (fluke) when i changed my front disc i brought a whole bag of the counter sunk bolts, and its the exact same bolts holding the mani's on... yay

"happy jon" :dirtbike:
Posted Image
,C26 604e, Posted Image

Offline Profile Quote Post Goto Top
 
pickle3
Earl
[ *  *  *  *  * ]
I gave up trying to salvage them inlet manifold things off my broken head, wanted them as spares too
<_<
Would like to know where u got them bolts from tho?

:dirtbike:
http://i864.photobucket.com/albums/ab205/p...13/SAM_0759.jpg
Offline Profile Quote Post Goto Top
 
« Previous Topic · Intake & Exhaust · Next Topic »
Add Reply