Welcome Guest [Log In] [Register]
Welcome to CCM MaD. We hope you enjoy your visit.

If it's your first time here please make your first post in either the 'Welcome' or 'Chat' section so we can verify your account quicker, untill verified your posts will need to be manually approved before they show, please be patient.


Join our community!


If you're already a member please log in to access all of our features:

Username:   Password:
Add Reply
R30
Topic Started: Feb 1 2012, 05:44 PM (9,751 Views)
hursty46
Member Avatar
The Hulk
[ *  *  *  *  *  *  *  *  *  * ]
Carbon cans are the way forward I don't like polished cans on supermotos don't look mean enough can't beat a wrapped exhsust the meaner they look the better and easier to keep clean one wipe its mint again unlike the polished ones hours n its all shiney again that's a lot of sideways time your missing out on!!
Posted Image

Like my CCM I'm old, overweight and badly maintained but I can still surprise you by how fast I can move!!
Offline Profile Quote Post Goto Top
 
hursty46
Member Avatar
The Hulk
[ *  *  *  *  *  *  *  *  *  * ]
jonny h
Jan 12 2013, 03:01 PM
well... this was on my winter re-vamp list ... just not in january, in fact it was more april ish.
still after a visit to the lovely Mr Muddy pete it can now be ticked off :)

Posted Image
Nice you going to wrap it ?
Posted Image

Like my CCM I'm old, overweight and badly maintained but I can still surprise you by how fast I can move!!
Offline Profile Quote Post Goto Top
 
jonny h
Member Avatar
this is how i roll!
[ *  *  *  *  *  *  *  *  *  * ]
hursty46
Jan 12 2013, 11:53 PM
Nice you going to wrap it ?
i dont do wrapping hursty .. what i have planed is sooo much better, i do think polished look good on supermotos though, on the right bike, but like wristy said i think its down to what the wheels look like.

anyway hopefully i shall update in a couple of weeks :)
Posted Image
,C26 604e, Posted Image

Offline Profile Quote Post Goto Top
 
rossonza
Member Avatar
Supermoto Mad
[ *  *  *  *  *  *  *  *  *  * ]
Remember full carbon will shatter if your making your own. I've worked with making my own carbon fibre.
Offline Profile Quote Post Goto Top
 
hursty46
Member Avatar
The Hulk
[ *  *  *  *  *  *  *  *  *  * ]
You might change my mind jonny when yours finished I just like to see supermotos muddy ruff n ready for anything now a streetfighter polished cans swinger frame etc very nice but each each to there own ;)
Posted Image

Like my CCM I'm old, overweight and badly maintained but I can still surprise you by how fast I can move!!
Offline Profile Quote Post Goto Top
 
jonny h
Member Avatar
this is how i roll!
[ *  *  *  *  *  *  *  *  *  * ]
oo .. whats in the MAhoosive box? .. dead body maybe?
Posted Image

or a black swingarm
Posted Image

and sub frame
Posted Image

and frame
Posted Image

very very happy bunny :)







oo hold on ... theres something at the bottom as well









Posted Image

hell yeah :)
Posted Image
,C26 604e, Posted Image

Offline Profile Quote Post Goto Top
 
Monty
Member Avatar
Charlie Big Banana's
[ *  *  *  *  *  *  *  *  *  * ]
cripes dude, dont go out at night, no bugger will see you....

So the rebuild starts
If it aint sharp I can play with it
My Utube Channel, lots of bike vids here. Subscribe if you likehttp://www.youtube.com/user/choppermark?feature=watch

Posted Image
Online Profile Quote Post Goto Top
 
jonny h
Member Avatar
this is how i roll!
[ *  *  *  *  *  *  *  *  *  * ]
sort of mark , but i havnt even sent my suspension off yet :( or sorted the engine
Posted Image
,C26 604e, Posted Image

Offline Profile Quote Post Goto Top
 
wR1sty
Member Avatar
King
[ *  *  *  *  *  *  *  *  * ]
Sweet Jonny!!! Stealth R30 get in!
If your not on the edge, your taking up too much room
Offline Profile Quote Post Goto Top
 
mongoose
Member Avatar
Viscount
[ *  *  *  * ]
Its gonna look mint mate! What sort of coating did they use on your header & end-can if you dont mind me asking?
Offline Profile Quote Post Goto Top
 
jonny h
Member Avatar
this is how i roll!
[ *  *  *  *  *  *  *  *  *  * ]
mongoose
Feb 7 2013, 09:04 AM
Its gonna look mint mate! What sort of coating did they use on your header & end-can if you dont mind me asking?
pretty sure it was this powder

HR 500 is suitable for interior and exterior applications, typical application areas are complete exhaust system components for automotive engines of all sizes.

Fine black Texture finish.

Posted Image
,C26 604e, Posted Image

Offline Profile Quote Post Goto Top
 
mongoose
Member Avatar
Viscount
[ *  *  *  * ]
Nice 1 jonny, ta for the info. The finish really does look good . I have spent hours polishing my header up but after 5 or 6 outings it returns back to its cack brown colour so I may look into getting something like this done, well impressed.
Edited by mongoose, Feb 8 2013, 08:24 AM.
Offline Profile Quote Post Goto Top
 
jonny h
Member Avatar
this is how i roll!
[ *  *  *  *  *  *  *  *  *  * ]
mongoose
Feb 8 2013, 08:23 AM
Nice 1 jonny, ta for the info. The finish really does look good . I have spent hours polishing my header up but after 5 or 6 outings it returns back to its cack brown colour so I may look into getting something like this done, well impressed.
some people have two pipes for that very reason so there's always a polished one ready to go on ;)
Posted Image
,C26 604e, Posted Image

Offline Profile Quote Post Goto Top
 
Monty
Member Avatar
Charlie Big Banana's
[ *  *  *  *  *  *  *  *  *  * ]
You been in my shed again Jon............... B)
If it aint sharp I can play with it
My Utube Channel, lots of bike vids here. Subscribe if you likehttp://www.youtube.com/user/choppermark?feature=watch

Posted Image
Online Profile Quote Post Goto Top
 
jonny h
Member Avatar
this is how i roll!
[ *  *  *  *  *  *  *  *  *  * ]
Monty
Feb 8 2013, 06:01 PM
You been in my shed again Jon............... B)
i love your shed! .. do you fancy having a lodger lol
Posted Image
,C26 604e, Posted Image

Offline Profile Quote Post Goto Top
 
Monty
Member Avatar
Charlie Big Banana's
[ *  *  *  *  *  *  *  *  *  * ]
It has been said before, rent it out during the summer months :D
If it aint sharp I can play with it
My Utube Channel, lots of bike vids here. Subscribe if you likehttp://www.youtube.com/user/choppermark?feature=watch

Posted Image
Online Profile Quote Post Goto Top
 
jonny h
Member Avatar
this is how i roll!
[ *  *  *  *  *  *  *  *  *  * ]
lol i was thinking .. bring a car full of bike parts over and have somewhere warm and dry to rebuild! .. mum didnt like the living room idea :(
Posted Image
,C26 604e, Posted Image

Offline Profile Quote Post Goto Top
 
jonny h
Member Avatar
this is how i roll!
[ *  *  *  *  *  *  *  *  *  * ]
well .. had a test fit today putting the sub frame on and the tail pod, this was too see how my harness was for length.
although i had done some rough measurements it would seem i got excited and its all abit long.

once the engine is back in and the head stock is on i'll need to do some trimming "sighs" but at least i'll be working with non corroded wires this time!
Posted Image
,C26 604e, Posted Image

Offline Profile Quote Post Goto Top
 
jonny h
Member Avatar
this is how i roll!
[ *  *  *  *  *  *  *  *  *  * ]
if you dont live down south tim radley from http://www.racedevelopments.co.uk/home/index.html is a top bloke who knows his stuff
and has all the time in the world for you, even during this busy part of the year when he has race engines in etc etc

anyway .. flowed, vavle guides done and seats and a little skim

Posted Image

Posted Image

Posted Image
Posted Image
,C26 604e, Posted Image

Offline Profile Quote Post Goto Top
 
jonny h
Member Avatar
this is how i roll!
[ *  *  *  *  *  *  *  *  *  * ]
test fit (= find all the bolts) front end rebuild

Posted Image

yokes/handle bar clamp sprayed black, new head bearings, carbon fender drilled and fitted

Posted Image
Edited by jonny h, Apr 15 2013, 04:48 PM.
Posted Image
,C26 604e, Posted Image

Offline Profile Quote Post Goto Top
 
Go to Next Page
« Previous Topic · Projects · Next Topic »
Add Reply