| Welcome to CCM MaD. We hope you enjoy your visit. If it's your first time here please make your first post in either the 'Welcome' or 'Chat' section so we can verify your account quicker, untill verified your posts will need to be manually approved before they show, please be patient. Join our community! If you're already a member please log in to access all of our features: |
- Pages:
- 1
- 2
| Can anyone guess what happened. | |
|---|---|
| Tweet Topic Started: May 16 2016, 08:50 AM (1,738 Views) | |
| Oddsie | May 16 2016, 05:03 PM Post #21 |
|
Knight
![]() ![]() ![]() ![]()
|
Wish I knew who worked on it. His tools would be removed from him and a good hard slap across the chops! Ha ha |
![]() |
|
| vinny900 | May 16 2016, 05:15 PM Post #22 |
|
Marquess
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
That is unbelievable. Must have been quite a bang. All that damage from a tiny bit of metal. Very bad news for you as these engines are becoming expensive, so I hear. And as you said, lucky you weren't doing 70 on the motorway with other traffic around, which is the main thing You aint gonna fix that with some JB weld and a big hammer. |
![]() |
|
| vinny900 | May 16 2016, 05:21 PM Post #23 |
|
Marquess
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
That is unbelievable. Must have been quite a bang. All that damage from a tiny bit of metal. Very bad news for you as these engines are becoming expensive, so I hear. And as you said, lucky you weren't doing 70 on the motorway with other traffic around, which is the main thing You aint gonna fix that with some JB weld and a big hammer. |
![]() |
|
| Oddsie | May 16 2016, 05:24 PM Post #24 |
|
Knight
![]() ![]() ![]() ![]()
|
I do have a tig welder lol. It was just a loud crack as the engine stopped dead. Then only tyre noise before I got the clutch in. My wife was going to go on it but thankfully I wanted to test it out first. Would have been worse for her |
![]() |
|
| vinny900 | May 16 2016, 05:43 PM Post #25 |
|
Marquess
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
Bearing in mind what was wrong with the bike, I think you and your wife have both been extremely lucky. Much better a knacked engine than damage to either of you. As you said it was a time bomb which could have gone off anytime. |
![]() |
|
| Gonzo250 | May 16 2016, 06:57 PM Post #26 |
|
Working-class moto psycho
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
My good god! That is frankly terrifying! I've got a spare generator case if it's any good to you? Personally I'd throw those cases away and chat Stevo604 up for a set of his... There's a NOS pair of Rotax cases on fleabay at the moment, but at £450 + post, it's a bit much... |
|
I drink too much, I swear too much, I ride too fast and I crash too often. It is a universal impossibility for me to leave my tools alone and my bikes standard. 'It must go faster!!' | |
![]() |
|
| motomaniac | May 16 2016, 07:46 PM Post #27 |
|
King
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
Shiiiiiiiiiiiiiiit..".😮 |
![]() |
|
| Oddsie | May 17 2016, 08:09 AM Post #28 |
|
Knight
![]() ![]() ![]() ![]()
|
I will tie up with Stevo604 I would hate to break this for parts :-( hopefully it can be saved |
![]() |
|
| Dom-r30 | May 17 2016, 10:48 AM Post #29 |
|
Marquess
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
Don't break it. Is your piston, barrel and top end ok? |
![]() |
|
| Oddsie | May 17 2016, 10:50 AM Post #30 |
|
Knight
![]() ![]() ![]() ![]()
|
Still turns over on the kickstart. And the bore looks OK aswell. From looking up through the big hole lol |
![]() |
|
| RB636 | May 22 2016, 10:33 PM Post #31 |
|
Potato Farmer
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
Theres some mt500 cases on ebay. 50 quid right now. Whoever built that is a moron. Hopefully it was a genuine accident. |
![]() |
|
| Dom-r30 | May 26 2016, 02:32 PM Post #32 |
|
Marquess
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
Have you started a plan to repair? |
![]() |
|
| stevo604 | May 26 2016, 07:04 PM Post #33 |
|
God
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
I have a plan for it I bought it will build it into my spare engine I have in bits
|
![]() |
|
| Dom-r30 | May 26 2016, 07:22 PM Post #34 |
|
Marquess
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
Well done Stevo604. Another one saved. |
![]() |
|
| Britcyclerider | May 28 2016, 05:32 PM Post #35 |
|
Viscount
![]() ![]() ![]() ![]() ![]() ![]()
|
Yet another example of excessive use of silicon sealants. I've seen this stuff inside too many engines. If you have to use it, pretend it is made of gold dust! |
![]() |
|
| Gonzo250 | May 28 2016, 07:52 PM Post #36 |
|
Working-class moto psycho
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
Blue hylomar wrote off my Ford Maverick. Bunged up a waterway, blew the head gasket and caused no.2 to pick up summat wicked... |
|
I drink too much, I swear too much, I ride too fast and I crash too often. It is a universal impossibility for me to leave my tools alone and my bikes standard. 'It must go faster!!' | |
![]() |
|
| Oddsie | May 30 2016, 09:52 AM Post #37 |
|
Knight
![]() ![]() ![]() ![]()
|
Sadly my ccm plans have come to a close. But I am glad it has went to a deserving home :-) 24miles....... I can concentrate on going fast on my dragbike now instead. Lol managed a 9.1 @ 156mph yesterday a new PB |
![]() |
|
| « Previous Topic · 604 DS & R30 · Next Topic » |
- Pages:
- 1
- 2





![]](http://z2.ifrm.com/static/1/pip_r.png)



8:55 AM Jul 11