Welcome Guest [Log In] [Register]
Welcome to CCM MaD. We hope you enjoy your visit.

If it's your first time here please make your first post in either the 'Welcome' or 'Chat' section so we can verify your account quicker, untill verified your posts will need to be manually approved before they show, please be patient.


Join our community!


If you're already a member please log in to access all of our features:

Username:   Password:
Add Reply
Rotax 860 cam
Topic Started: Mar 8 2015, 01:52 PM (1,026 Views)
jonny h
Member Avatar
this is how i roll!
[ *  *  *  *  *  *  *  *  *  * ]
SOLD
Edited by jonny h, Mar 13 2015, 01:02 AM.
Posted Image
,C26 604e, Posted Image

Offline Profile Quote Post Goto Top
 
RB636
Member Avatar
Potato Farmer
[ *  *  *  *  *  *  *  *  *  * ]
Here here rotax tuning enthusiasts, if you don't mind a questionable idle here's the cam to have for horsepower.
Offline Profile Quote Post Goto Top
 
Gonzo250
Member Avatar
Working-class moto psycho
[ *  *  *  *  *  *  *  * ]
Ooh! Ooh! Lemme talk to SWMBO...
I drink too much, I swear too much, I ride too fast and I crash too often.

It is a universal impossibility for me to leave my tools alone and my bikes standard. 'It must go faster!!'
Offline Profile Quote Post Goto Top
 
jonny h
Member Avatar
this is how i roll!
[ *  *  *  *  *  *  *  *  *  * ]
any movement on this, before we go to ebay and all the supermono lads
Posted Image
,C26 604e, Posted Image

Offline Profile Quote Post Goto Top
 
Gonzo250
Member Avatar
Working-class moto psycho
[ *  *  *  *  *  *  *  * ]
Yes! Sell me your cam! Give it to me! I NEED IT IN MY LIFE!!!!
I drink too much, I swear too much, I ride too fast and I crash too often.

It is a universal impossibility for me to leave my tools alone and my bikes standard. 'It must go faster!!'
Offline Profile Quote Post Goto Top
 
jonny h
Member Avatar
this is how i roll!
[ *  *  *  *  *  *  *  *  *  * ]
Gonzo250
Mar 10 2015, 09:53 PM
Yes! Sell me your cam! Give it to me! I NEED IT IN MY LIFE!!!!
PM'd
Posted Image
,C26 604e, Posted Image

Offline Profile Quote Post Goto Top
 
Gonzo250
Member Avatar
Working-class moto psycho
[ *  *  *  *  *  *  *  * ]
Turned up today, safe and sound. Now I gotta get/make me a cam puller...
I drink too much, I swear too much, I ride too fast and I crash too often.

It is a universal impossibility for me to leave my tools alone and my bikes standard. 'It must go faster!!'
Offline Profile Quote Post Goto Top
 
RB636
Member Avatar
Potato Farmer
[ *  *  *  *  *  *  *  *  *  * ]
Easy enough to do, I thought getting it in was harder :twss:
Offline Profile Quote Post Goto Top
 
stevenfuture
King
[ *  *  *  *  *  *  *  *  * ]
RB636
Mar 15 2015, 10:21 AM
Easy enough to do, I thought getting it in was harder :twss:
F'naa F'naa snigger snigger, I must have been reading 'VIZ' to much
Long live Sid 'the sextist
Edited by stevenfuture, Mar 15 2015, 11:14 AM.
Testiculos habet ingens et bene sedeant
Offline Profile Quote Post Goto Top
 
RB636
Member Avatar
Potato Farmer
[ *  *  *  *  *  *  *  *  *  * ]
Bit of finnbar saunders double entaunders there
Offline Profile Quote Post Goto Top
 
jonny h
Member Avatar
this is how i roll!
[ *  *  *  *  *  *  *  *  *  * ]
Gonzo250
Mar 14 2015, 07:39 PM
Turned up today, safe and sound. Now I gotta get/make me a cam puller...
threaded bar, couple of nuts and a MASSIVE socket type of thing, just make sure you lay the bike down,
and be very careful about the washer that tries to get caught in the groove when pulling the cam out ..
hence laying the bike over
Posted Image
,C26 604e, Posted Image

Offline Profile Quote Post Goto Top
 
BK350
Member Avatar
Marquess
[ *  *  *  *  *  * ]
well said Jonny - have two bent washers here as reminder for me to be patient when pulling the cam out.....

Chris
Offline Profile Quote Post Goto Top
 
Gonzo250
Member Avatar
Working-class moto psycho
[ *  *  *  *  *  *  *  * ]
I can knock one up at work, so no worries there. Just gotta get dimensions.

Cheers for the tip on laying the bike over though! Save me grief finding out the hard way!
I drink too much, I swear too much, I ride too fast and I crash too often.

It is a universal impossibility for me to leave my tools alone and my bikes standard. 'It must go faster!!'
Offline Profile Quote Post Goto Top
 
Sportax Racing
Anything & Everything ROTAX
[ *  *  *  *  *  *  * ]
BK350
Mar 15 2015, 07:56 PM
well said Jonny - have two bent washers here as reminder for me to be patient when pulling the cam out.....

Chris
At least you didnt break the head pulling out the cam! seen one like that before, bending the shim is getting off V V lightly! Also seen the back roller bearing for the cam pushed clean through the head! Expensive!
www.sportaxracing.co.uk
Offline Profile Quote Post Goto Top
 
Gonzo250
Member Avatar
Working-class moto psycho
[ *  *  *  *  *  *  *  * ]
See, comments like that are not especially encouraging!
I drink too much, I swear too much, I ride too fast and I crash too often.

It is a universal impossibility for me to leave my tools alone and my bikes standard. 'It must go faster!!'
Offline Profile Quote Post Goto Top
 
ZetaBoards - Free Forum Hosting
Join the millions that use us for their forum communities. Create your own forum today.
« Previous Topic · Sell · Next Topic »
Add Reply