| Welcome to CCM MaD. We hope you enjoy your visit. If it's your first time here please make your first post in either the 'Welcome' or 'Chat' section so we can verify your account quicker, untill verified your posts will need to be manually approved before they show, please be patient. Join our community! If you're already a member please log in to access all of our features: |
- Pages:
- 1
- 2
| Kent cam questions!! | |
|---|---|
| Tweet Topic Started: Jan 21 2015, 09:22 AM (1,492 Views) | |
| sdysonR30 | Jan 21 2015, 09:22 AM Post #1 |
|
Marquess
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
Ive hunted through the topics but cant see any thing im looking for so sorry if its already been asked, Im pulling the head apart to do valves, seals and check the rings, so sending my cam off to kent cams to get re profiled at the same time, is there any thing else i could do at the same time? port polish? flowed? and so on? id love to do the 710 but i wouldn't know where to start or how much it will cost. Main question is, will the kent cam still be worth doing and give me a noticeable gain with the std 644?
|
![]() |
|
| Monty | Jan 21 2015, 10:29 AM Post #2 |
![]()
Charlie Big Banana's
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
The best bang for your bucks is the kent cam, porting and flowing wont make a lot unless you go 710. More mid range grunt where you want it. |
|
If it aint sharp I can play with it My Utube Channel, lots of bike vids here. Subscribe if you likehttp://www.youtube.com/user/choppermark?feature=watch
| |
![]() |
|
| sdysonR30 | Jan 21 2015, 10:51 AM Post #3 |
|
Marquess
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
Ideal thanks Monty, is there any thing else worth doing whilst its in pieces? and anything else i will need to buy for refitting? or can i use everything i took off? excluding head gasket? |
![]() |
|
| Monty | Jan 21 2015, 02:02 PM Post #4 |
![]()
Charlie Big Banana's
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
you don't have to take the head off to change the cam, best get another cam tensioner gasket, it may tear when removed. get some silicon for the top cover as no gasket there |
|
If it aint sharp I can play with it My Utube Channel, lots of bike vids here. Subscribe if you likehttp://www.youtube.com/user/choppermark?feature=watch
| |
![]() |
|
| sdysonR30 | Jan 21 2015, 03:09 PM Post #5 |
|
Marquess
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
The heads coming off at the same time any way mate, nice one rather get it and not need it than not have it and need it!.....i can put money on me tearing it lol |
![]() |
|
| hursty46 | Jan 21 2015, 03:15 PM Post #6 |
|
The Hulk
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
Good move on the Kent cam they make such a big difference you will love it |
![]() Like my CCM I'm old, overweight and badly maintained but I can still surprise you by how fast I can move!! | |
![]() |
|
| sdysonR30 | Jan 21 2015, 03:47 PM Post #7 |
|
Marquess
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
Hope so Hursty! spoke to Tony earlier and its going to be £96 with about 10 days turn around! happy with that! although from reading on here prices seem to vary...ALOT lol |
![]() |
|
| Monty | Jan 21 2015, 07:51 PM Post #8 |
![]()
Charlie Big Banana's
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
Your price is for one to be done, its cheaper if 2 or more get sent in, as the machine only has to be set up once. |
|
If it aint sharp I can play with it My Utube Channel, lots of bike vids here. Subscribe if you likehttp://www.youtube.com/user/choppermark?feature=watch
| |
![]() |
|
| hursty46 | Jan 21 2015, 08:38 PM Post #9 |
|
The Hulk
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
Mine was a few days turn around from Tony you should keep your eye out for a 710 kit! |
![]() Like my CCM I'm old, overweight and badly maintained but I can still surprise you by how fast I can move!! | |
![]() |
|
| sdysonR30 | Jan 21 2015, 09:32 PM Post #10 |
|
Marquess
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
Monty i didnt think to ask about a price for doing more, is any one else looking to get it done? ill be sending mine in the next 4-5weeks but can wait abit longer or earlier if anyone else is keen? Hursty Thats the plan in the long run mate, where would i find one for sale? Or wheres best to get it bored and source a piston? From reading all the threads on here its not as simple as it sounds Edited by sdysonR30, Jan 21 2015, 09:35 PM.
|
![]() |
|
| hursty46 | Jan 22 2015, 05:44 PM Post #11 |
|
The Hulk
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
You just missed one off Jay! |
![]() Like my CCM I'm old, overweight and badly maintained but I can still surprise you by how fast I can move!! | |
![]() |
|
| wirral121 | Jan 22 2015, 06:52 PM Post #12 |
|
Duke
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
Just bought 2nd hand cam last week wasn,t planning on getting it reprofiled till later in year ,though if its cheaper to get two or more done at same time I would take part ,but today I paid for my summer holiday (credit card) and March would be earliest for cam job. |
![]() |
|
| sdysonR30 | Jan 22 2015, 08:07 PM Post #13 |
|
Marquess
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
No way?! that is my luck all over Hursty lol! what sort of price ish should i expect to pay getting it done and piston all in? Wirral from what ive read on here its more than 2 for a discount so if we can find some one else i will hang on! |
![]() |
|
| Lorano | Jan 22 2015, 10:07 PM Post #14 |
|
Marquess
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
I got a print out with my bike along with other stuff that said it produced 46.6bhp at the back wheel.The bike is ment to have the 710cc kit fitted,cam and jets is this a true reading if all is 'honest'?
Edited by Lorano, Jan 22 2015, 10:08 PM.
|
![]() |
|
| Monty | Jan 22 2015, 11:56 PM Post #15 |
![]()
Charlie Big Banana's
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
That's a fair increase from the 33rwbhp from std, so yes it honest. all depends on the dyno and the operator on the day |
|
If it aint sharp I can play with it My Utube Channel, lots of bike vids here. Subscribe if you likehttp://www.youtube.com/user/choppermark?feature=watch
| |
![]() |
|
| sdysonR30 | Jan 23 2015, 07:09 AM Post #16 |
|
Marquess
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
i feel like im cheating my self and the bike by not having 710 haha! i do really want to get it done, but as i said i wouldnt know where to start! if any one could point me in the right direction for rebore and piston i could get the ball rolling :P |
![]() |
|
| hursty46 | Jan 23 2015, 07:23 AM Post #17 |
|
The Hulk
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
Leave it with me I know were there is a bike that might have a 710 going to be broke 😉 drop me a pm buddy |
![]() Like my CCM I'm old, overweight and badly maintained but I can still surprise you by how fast I can move!! | |
![]() |
|
| Monty | Jan 23 2015, 08:13 AM Post #18 |
![]()
Charlie Big Banana's
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
Haines do the 710 kits http://www.hainesmc.co.uk/ccm_motorcycle_spares/ccm_644_spares/ccm_644_performance_upgrades_and_accessories/ |
|
If it aint sharp I can play with it My Utube Channel, lots of bike vids here. Subscribe if you likehttp://www.youtube.com/user/choppermark?feature=watch
| |
![]() |
|
| sdysonR30 | Jan 23 2015, 08:29 AM Post #19 |
|
Marquess
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
Pm sent Hursty! Yeh ive seen them on Haines Monty but id like to try and do it for less then they sell them, fingers crossed hursty can come up with something :D |
![]() |
|
| wirral121 | Jan 23 2015, 09:13 AM Post #20 |
|
Duke
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
I bought a spare barrel with piston just before xmas £60 Ebay with Dino importing PROCYCLE 790 big bore kit waiting to see how this engine goes. I was given a used 710 piston with bike though it has minor scoring on skirt will take to local ex bike racer to see if it can be salvaged maybe with just new rings. I will decide on big bore size after Dino has finished with his tuning it wont be to next winter. |
![]() |
|
| Go to Next Page | |
| « Previous Topic · Chat · Next Topic » |
- Pages:
- 1
- 2





![]](http://z2.ifrm.com/static/1/pip_r.png)





1:00 AM Jul 11