| Welcome to CCM MaD. We hope you enjoy your visit. If it's your first time here please make your first post in either the 'Welcome' or 'Chat' section so we can verify your account quicker, untill verified your posts will need to be manually approved before they show, please be patient. Join our community! If you're already a member please log in to access all of our features: |
| Disassemble an R30?; Easy enough to do? | |
|---|---|
| Tweet Topic Started: Nov 5 2014, 01:54 PM (372 Views) | |
| Grurple | Nov 5 2014, 01:54 PM Post #1 |
|
Viscount
![]() ![]() ![]() ![]() ![]() ![]()
|
Hi All If I decide to go ahead I'll post my progress in the project section but first, how easy is it to take a R30 644 apart - down to the frame so I can get it coated? Anyone done it? Any gotchas you want to share? Cheers. |
![]() |
|
| hursty46 | Nov 5 2014, 05:13 PM Post #2 |
|
The Hulk
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
Peace of piss just watch out for some bolts as they may round off |
![]() Like my CCM I'm old, overweight and badly maintained but I can still surprise you by how fast I can move!! | |
![]() |
|
| Monty | Nov 5 2014, 05:31 PM Post #3 |
![]()
Charlie Big Banana's
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
use a jack under the frame as the swinger and rear wheel have to come off before the engine can come out |
|
If it aint sharp I can play with it My Utube Channel, lots of bike vids here. Subscribe if you likehttp://www.youtube.com/user/choppermark?feature=watch
| |
![]() |
|
| Grurple | Nov 5 2014, 10:00 PM Post #4 |
|
Viscount
![]() ![]() ![]() ![]() ![]() ![]()
|
Thanks Monty - good tip. I notice that theres not much scope for an abba stand on these bikes... |
![]() |
|
| stevo604 | Nov 6 2014, 12:02 AM Post #5 |
|
God
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
take plenty of pics so you will know were everything goes when putting back together
|
![]() |
|
| « Previous Topic · Chat · Next Topic » |





![]](http://z2.ifrm.com/static/1/pip_r.png)





2:37 PM Jul 11