Welcome Guest [Log In] [Register]
Welcome to CCM MaD. We hope you enjoy your visit.

If it's your first time here please make your first post in either the 'Welcome' or 'Chat' section so we can verify your account quicker, untill verified your posts will need to be manually approved before they show, please be patient.


Join our community!


If you're already a member please log in to access all of our features:

Username:   Password:
Add Reply
full Black WP forks
Topic Started: Jul 11 2014, 08:24 PM (1,007 Views)
jonny h
Member Avatar
this is how i roll!
[ *  *  *  *  *  *  *  *  *  * ]
these are taking up space and iv'e been thinking about fitting them, but the rallying would wreck all the hard work and money.
so i thought i would give them another shot. for any new members who havnt seen these before, they cost me over £800 to get them looking like this, i'm asking for £400. they will be back on ebay but at a higher price than here.

43mm WP forks, fully serviced, tops polished then anodized black, lowers stripped then diamond like coated black, powder coated wheel clamps

Posted Image
Posted Image
,C26 604e, Posted Image

Offline Profile Quote Post Goto Top
 
mphbhp
Member Avatar
PIE EATER
[ *  *  *  *  *  *  *  * ]
Someone buy these! Bargain and they look fooking awesome!
Posted Image
Offline Profile Quote Post Goto Top
 
jonny h
Member Avatar
this is how i roll!
[ *  *  *  *  *  *  *  *  *  * ]
just to give you some info if anyone still thinks £400 is a lot to ask

DLC - £250 per leg
HARD ANODISING - £150 per leg + £50 per leg as they had to be polished smooth first.
FULL SERVICE -£100
i think i got the powder coating for about £50 ish
Posted Image
,C26 604e, Posted Image

Offline Profile Quote Post Goto Top
 
jonny h
Member Avatar
this is how i roll!
[ *  *  *  *  *  *  *  *  *  * ]
just to say i am looking in to fitting these on to my Rotax as i cant have them sat here doing nothing.
it will be a shame to use them for Rallying .. but hey at least they will look good for one race.

anyway once i know i can do the yoke swap i will give a one day last chance then that will be it.

i'm only pushing these as they should be on a nice clean bike .. i did not spend all that money to then take them off roading.
Posted Image
,C26 604e, Posted Image

Offline Profile Quote Post Goto Top
 
hursty46
Member Avatar
The Hulk
[ *  *  *  *  *  *  *  *  *  * ]
Be a shame to see them wrecked after a day of off-roading ;(
Posted Image

Like my CCM I'm old, overweight and badly maintained but I can still surprise you by how fast I can move!!
Offline Profile Quote Post Goto Top
 
jonny h
Member Avatar
this is how i roll!
[ *  *  *  *  *  *  *  *  *  * ]
hursty46
Jul 23 2014, 05:03 PM
Be a shame to see them wrecked after a day of off-roading ;(
well .. it's even worse seeing them at the back of a cupboard .. if i'm going to chuck money away at least i will have fun doing it :dirtbike:
Posted Image
,C26 604e, Posted Image

Offline Profile Quote Post Goto Top
 
jonny h
Member Avatar
this is how i roll!
[ *  *  *  *  *  *  *  *  *  * ]
yokes have been taken in to be modded, so these forks are no longer for sale
Posted Image
,C26 604e, Posted Image

Offline Profile Quote Post Goto Top
 
zemil
Commoner
[ * ]
jonny h
Aug 30 2014, 09:39 PM
yokes have been taken in to be modded, so these forks are no longer for sale
I'm looking to buy only WP front suspension without yokes, yours are no longer for sale because the yokes?
Offline Profile Quote Post Goto Top
 
zemil
Commoner
[ * ]
Hello, I'm looking to buy WP front suspension from 644. I'm not sure if WP made for this model more than one type of fork. can you please show me serial number from your suspension?
My project is trying to replicate this one: http://www.advrider.com/forums/showthread.php?t=960054
Offline Profile Quote Post Goto Top
 
« Previous Topic · Sell · Next Topic »
Add Reply