Welcome Guest [Log In] [Register]
Welcome to CCM MaD. We hope you enjoy your visit.

If it's your first time here please make your first post in either the 'Welcome' or 'Chat' section so we can verify your account quicker, untill verified your posts will need to be manually approved before they show, please be patient.


Join our community!


If you're already a member please log in to access all of our features:

Username:   Password:
Add Reply
Newbie
Topic Started: Apr 30 2014, 02:38 PM (596 Views)
4l0
Member Avatar
Baron
[ *  *  * ]
Hi guys another newbie,i was on the old forum which Steve ran years ago.Sold my CCM 644 many years ago which i am now in the market looking for another as just sold a 2011 Huskie SMS 630.Anyway i have had a 644 before and had the first R30 Rotax in my area Sleaford,Lincolnshire.Wasnt that impressed with the Rotax but loved my 644.Yellow one to... fastest :arms: Anyway looks like i am going back 8 years as i want a RD350LC to.Had a two 350,s and a 250 and sold the lot with my 644.Very big regrets.
Running 150 mains 27.5 pilot jets, K&N, needles 2nd from bottom, TPS set, valve dingy junked, Irridium plugs, Remus race can.............................need a Kent cam next!!!!
Offline Profile Quote Post Goto Top
 
Monty
Member Avatar
Charlie Big Banana's
[ *  *  *  *  *  *  *  *  *  * ]
welcome mate
If it aint sharp I can play with it
My Utube Channel, lots of bike vids here. Subscribe if you likehttp://www.youtube.com/user/choppermark?feature=watch

Posted Image
Offline Profile Quote Post Goto Top
 
hursty46
Member Avatar
The Hulk
[ *  *  *  *  *  *  *  *  *  * ]
Welcome to the site good choice with the Suzuki lump!! Lol
Posted Image

Like my CCM I'm old, overweight and badly maintained but I can still surprise you by how fast I can move!!
Offline Profile Quote Post Goto Top
 
ian6pot
Member Avatar
God
[ *  *  *  *  *  *  *  *  *  * ]
Welcome to the site. How can you not be impressed by the Rotax.
Offline Profile Quote Post Goto Top
 
4l0
Member Avatar
Baron
[ *  *  * ]
ian6pot
Apr 30 2014, 11:51 PM
Welcome to the site. How can you not be impressed by the Rotax.
Was a while ago when they first came out.Bought a brandnew R30 from Appleyards. Just wasn't that impressed. Mines was a pig to start,and when it did tended to stall, to be fair cannot remember the other issues i had,but it was new,so early problems had not been sorted.Plus there was no local dealer in Lincs at time.
Running 150 mains 27.5 pilot jets, K&N, needles 2nd from bottom, TPS set, valve dingy junked, Irridium plugs, Remus race can.............................need a Kent cam next!!!!
Offline Profile Quote Post Goto Top
 
4l0
Member Avatar
Baron
[ *  *  * ]
Posted Image
Edited by Monty, May 1 2014, 03:08 PM.
Running 150 mains 27.5 pilot jets, K&N, needles 2nd from bottom, TPS set, valve dingy junked, Irridium plugs, Remus race can.............................need a Kent cam next!!!!
Offline Profile Quote Post Goto Top
 
ian6pot
Member Avatar
God
[ *  *  *  *  *  *  *  *  *  * ]
4l0
May 1 2014, 10:34 AM
ian6pot
Apr 30 2014, 11:51 PM
Welcome to the site. How can you not be impressed by the Rotax.
Was a while ago when they first came out.Bought a brandnew R30 from Appleyards. Just wasn't that impressed. Mines was a pig to start,and when it did tended to stall, to be fair cannot remember the other issues i had,but it was new,so early problems had not been sorted.Plus there was no local dealer in Lincs at time.
OK i will let you off then :flowers:
Offline Profile Quote Post Goto Top
 
4l0
Member Avatar
Baron
[ *  *  * ]
:)
Running 150 mains 27.5 pilot jets, K&N, needles 2nd from bottom, TPS set, valve dingy junked, Irridium plugs, Remus race can.............................need a Kent cam next!!!!
Offline Profile Quote Post Goto Top
 
hursty46
Member Avatar
The Hulk
[ *  *  *  *  *  *  *  *  *  * ]
Nice clean Ccm you had there
Edited by Monty, May 1 2014, 06:02 PM.
Posted Image

Like my CCM I'm old, overweight and badly maintained but I can still surprise you by how fast I can move!!
Offline Profile Quote Post Goto Top
 
4l0
Member Avatar
Baron
[ *  *  * ]
hursty46
May 1 2014, 03:23 PM
4l0
May 1 2014, 02:37 PM
Posted Image
Nice clean Ccm you had there
Wish I still had it. Was a few years back.
Running 150 mains 27.5 pilot jets, K&N, needles 2nd from bottom, TPS set, valve dingy junked, Irridium plugs, Remus race can.............................need a Kent cam next!!!!
Offline Profile Quote Post Goto Top
 
hursty46
Member Avatar
The Hulk
[ *  *  *  *  *  *  *  *  *  * ]
Ye I bet you do I wouldn't of parted with that tbh it looks mint
Posted Image

Like my CCM I'm old, overweight and badly maintained but I can still surprise you by how fast I can move!!
Offline Profile Quote Post Goto Top
 
stevo604
Member Avatar
God
[ *  *  *  *  *  *  *  *  *  * ]
welcome to the forum :arms: :drinks:

I love my Yamaha lc aswell have two ypvs waiting to be worked at. :angel:
Offline Profile Quote Post Goto Top
 
4l0
Member Avatar
Baron
[ *  *  * ]
stevo604
May 29 2014, 09:26 AM
welcome to the forum :arms: :drinks:

I love my Yamaha lc aswell have two ypvs waiting to be worked at. :angel:
Had two 350lc and a 250lc Steve up and till 7-8 year's ago. Wish I hadn't sold them.
Running 150 mains 27.5 pilot jets, K&N, needles 2nd from bottom, TPS set, valve dingy junked, Irridium plugs, Remus race can.............................need a Kent cam next!!!!
Offline Profile Quote Post Goto Top
 
stevo604
Member Avatar
God
[ *  *  *  *  *  *  *  *  *  * ]
I know how you feel, I sold a candy blue 350lc and it broke my heart.but I will come back better with another.

I have had two 350ypvs in a lockup for about ten years and to tell you the truth I forgot clean about them.
Offline Profile Quote Post Goto Top
 
4l0
Member Avatar
Baron
[ *  *  * ]
I had a candy blue to,and a white and blue one. 250 was white and red.
Running 150 mains 27.5 pilot jets, K&N, needles 2nd from bottom, TPS set, valve dingy junked, Irridium plugs, Remus race can.............................need a Kent cam next!!!!
Offline Profile Quote Post Goto Top
 
Dodger
Viscount
[ *  *  *  * ]
Welcome back.
Offline Profile Quote Post Goto Top
 
« Previous Topic · Welcome · Next Topic »
Add Reply